Hunter Fan 54014, 54015 You’Re Done, Switch Housing continued, Congratualtions, all three screws

Models: 54014 54018 54017 54016 54015

1 17

Page 14

www.HunterFan.com

1.888.830.1326

Connect the plugs from the upper and	Lift the lower switch housing until its
lower switch housings. Make sure to line up	screw holes are aligned with the screw
the colored markings on the connectors.	holes in the upper switch housing.
	Install the three switch housing screws,
	found in the	hardware bag. Tighten



	all three screws.

		Make sure the lower switch housing is securely attached to
		the upper switch housing. Failure to properly secure all three
	14	assembly screws could result in the switch housing falling.
	14

M0074-01 • 05/14/14 • © Hunter Fan Company

Image 14

Contents

Tools Needed Table of ContentsWiring Mounting Options2 Shorter Downrod What to Expect with Your Installation1 Standard Downrod 3 Longer DownrodPower Drill optional Tools NeededWire Strippers LadderFOLD PLACE SLIDE Mounting OptionsOPTION OPTIONIf you are unable to do this Ceiling BracketMake sure all four bumpers are still attachedPreparation Option skip to next pageDownrod If you need a different downrod length follow these stepsDownrod continued 3/8”DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrodDownrod continued canopy. Let the canopy sit loosely on topWiring hardwareScrew CanopyHoles M0074-01 05/14/14 Hunter Fan CompanyBlades Switch Housing CONGRATUALTIONS Switch Housing continuedYOU’RE DONE lower switch housings. Make sure to line upOperation, Maintenance, & Cleaning Beat the High Cost of Cooling Operation, Maintenance, & Cleaning continuedHunter fans have the power to cut your cooling costs up to 40% Save Energy and Money While Protecting the EnvironmentTransmitter only works when held at close range TroubleshootingRemote control of fan is erratic Fan doesn’t work