Hunter Fan 54018, 54015, 54016, 54017, 54014 operation manual Downrod continued, 3/8”

Models: 54014 54018 54017 54016 54015

1 17

Page 8

www.HunterFan.com

1.888.830.1326

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at least 4-5 full turns) until it stops.

8”

The wires can be cut, but leave at least 8” extending from the top of the downrod.

Tighten the setscrew with pliers. DO NOT

HAND TIGHTEN.

If the setscrew is not tightened securely, the fan may fall.

Image 8

Contents

Table of Contents WiringTools Needed Mounting OptionsWhat to Expect with Your Installation 1 Standard Downrod2 Shorter Downrod 3 Longer DownrodTools Needed Wire StrippersPower Drill optional LadderMounting Options OPTIONFOLD PLACE SLIDE OPTIONCeiling Bracket Make sure all four bumpers areIf you are unable to do this still attachedPreparation skip to next page DownrodOption If you need a different downrod length follow these stepsDownrod continued 3/8”CANOPY OR WIRES. Place the downrod Downrod continuedDO NOT PICK THE FAN UP BY THE canopy. Let the canopy sit loosely on topWiring hardwareCanopy HolesScrew M0074-01 05/14/14 Hunter Fan CompanyBlades Switch Housing Switch Housing continued YOU’RE DONECONGRATUALTIONS lower switch housings. Make sure to line upOperation, Maintenance, & Cleaning Operation, Maintenance, & Cleaning continued Hunter fans have the power to cut your cooling costs up to 40%Beat the High Cost of Cooling Save Energy and Money While Protecting the EnvironmentTroubleshooting Remote control of fan is erraticTransmitter only works when held at close range Fan doesn’t work