Hunter Fan 54016, 54015, 54017, 54018 Canopy, Holes, Screw, M0074-01 05/14/14 Hunter Fan Company

Models: 54014 54018 54017 54016 54015

1 17

Page 11

www.HunterFan.com

1.888.830.1326

Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the

hardware bag.

Note: Fan style may vary.

Image 11

Contents

Mounting Options Table of ContentsWiring Tools Needed3 Longer Downrod What to Expect with Your Installation1 Standard Downrod 2 Shorter DownrodLadder Tools NeededWire Strippers Power Drill optionalOPTION Mounting OptionsOPTION FOLD PLACE SLIDEstill attached Ceiling BracketMake sure all four bumpers are If you are unable to do thisPreparation If you need a different downrod length follow these steps skip to next pageDownrod Option3/8” Downrod continuedcanopy. Let the canopy sit loosely on top CANOPY OR WIRES. Place the downrodDownrod continued DO NOT PICK THE FAN UP BY THEhardware WiringM0074-01 05/14/14 Hunter Fan Company CanopyHoles ScrewBlades Switch Housing lower switch housings. Make sure to line up Switch Housing continuedYOU’RE DONE CONGRATUALTIONSOperation, Maintenance, & Cleaning Save Energy and Money While Protecting the Environment Operation, Maintenance, & Cleaning continuedHunter fans have the power to cut your cooling costs up to 40% Beat the High Cost of CoolingFan doesn’t work TroubleshootingRemote control of fan is erratic Transmitter only works when held at close range