Hunter Fan 54016, 54015, 54017, 54018, 54014 operation manual Preparation

Models: 54014 54018 54017 54016 54015

1 17

Page 6

Time Saver Tip: Get a helper to insert grommets, found in the hardware bag, into the blades while you’re doing the next couple of steps.

Remove the shipping blocks from the motor. Save the screws. They will be needed for blade iron installation.

Note: Some fans will have a shipping ring instead of shipping blocks. Please remove the ring and save the screws.

www.HunterFan.com 1.888.830.1326

If you are installing multiple remote-controlled

fans on the same circuit breaker,

you may need to perform a few extra steps to prevent interference or faulty operation of your remote controls.

Go to www.HunterFan.com/FAQs and click “How do I properly install multiple remote- controlled fans?” for more information.

Image 6

Contents

Tools Needed Table of ContentsWiring Mounting Options2 Shorter Downrod What to Expect with Your Installation1 Standard Downrod 3 Longer DownrodPower Drill optional Tools NeededWire Strippers LadderFOLD PLACE SLIDE Mounting OptionsOPTION OPTIONIf you are unable to do this Ceiling BracketMake sure all four bumpers are still attachedPreparation Option skip to next pageDownrod If you need a different downrod length follow these stepsDownrod continued 3/8”DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrodDownrod continued canopy. Let the canopy sit loosely on topWiring hardwareScrew CanopyHoles M0074-01 05/14/14 Hunter Fan CompanyBlades Switch Housing CONGRATUALTIONS Switch Housing continuedYOU’RE DONE lower switch housings. Make sure to line upOperation, Maintenance, & Cleaning Beat the High Cost of Cooling Operation, Maintenance, & Cleaning continuedHunter fans have the power to cut your cooling costs up to 40% Save Energy and Money While Protecting the EnvironmentTransmitter only works when held at close range TroubleshootingRemote control of fan is erratic Fan doesn’t work