Getting Started – BASIC –

12 Press .

AUTO CALIBRATION

Connect calibration mic. Start measurement?

YES

NO

Auto Calibration starts.

Note

•Loud test sound is output when [AUTO CALIBRATION] starts. You cannot turn the volume down. Give consideration to children and neighbor.

•Avoid being in the measurement area and making noise during the measurement (which takes about 1 minute), as it may interfere with measurement.

13 Unplug the calibration mic and press C/cto select [YES].

Measurement complete.

 

 

FRONT L :

16ft

4.87m

0.0dB

FRONT R :

16ft

4.87m

0.0dB

CENTER :

16ft

4.87m

+ 1.0dB

SUBWOOFER :

16ft

4.87m

+ 4.0dB

SURROUND L :

10ft

3.04m

- 2.0dB

SURROUND R :

10ft

3.04m

- 2.0dB

If OK, unplug calibration mic and select

“YES”.

YES

NO

 

Note

•The environment of the room in which the system is installed may affect measurements.

•If measurement fails, follow the message then retry [AUTO CALIBRATION].

•When you select [SECOND ROOM] for [SPEAKER FORMATION], measurement of [SURROUND L] and [SURROUND R] is not displayed.

14 Press .Quick Setup is finished. All connections and setup operations are complete.To quit the Quick SetupPress DISPLAY in any Step.

Tip

•If you change the position of the speakers, reset the speaker settings. See “Getting Optimal Surround Sound for a Room” (page 82) and “Calibrating the Appropriate Settings Automatically” (page 84).

•If you want to change any of the settings, see “Using the Setup Display” (page 86).

To recall the Quick Setup display1Press DISPLAY when the system is in stop mode.The Control Menu display appears.2Press X/x to select [SETUP], then press .The options for [SETUP] appear.

1 2 ( 2 7 )

1 8 ( 3 4 )

DVD VIDEO

T

0 : 0 0 : 0 2

 

QUICK

QUICK

CUSTOM

RESET

3Press X/x to select [QUICK], then press .The Quick Setup display appears.
26US