Connect the calibration mic to the A.CAL MIC jack on the front panel, and set it up at the ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. Be quiet during the measurement.

AUDIO IN / A.CAL MIC

Calibration mic

5 Press X/x to select [YES], then press

.

Calibration starts.

Measuring. Please wait a moment.

Note

•Avoid being in the measurement area and making noise during the measurement (about one minute), to avoid measurement failure. During the measurement, test signals are output from the speakers.

•The environment of the room in which the system is installed may affect measurements.

•If an error message appears, follow the message, then select [YES].

An error message appears when:

–the headphones are connected.

–the calibration mic is not connected.

–front speakers are not correctly connected.

–surround speakers are not correctly connected.

–front and surround speakers are not correctly connected.

–subwoofer is not connected.

6 Press C/X/x/c to select [YES] or [NO], then press.
x The measurement is OK.

Advanced

Disconnect the calibration mic, then select

 

[YES]. The result is implemented.

 

 

 

 

 

 

 

 

 

 

 

Measurement complete.

 

 

 

 

Settings

 

FRONT L :

 

16ft

4.87m

0.0dB

 

 

FRONT R :

 

16ft

4.87m

0.0dB

 

 

 

CENTER :

 

16ft

4.87m

+ 1.0dB

 

 

 

SUBWOOFER :

16ft

4.87m

+ 4.0dB

 

 

 

SURROUND L :

10ft

3.04m

- 2.0dB

 

 

 

SURROUND R :

10ft

3.04m

- 2.0dB

 

and

 

“YES”.

 

 

 

 

 

 

 

 

If OK, unplug calibration mic and select

 

 

 

 

YES

 

 

NO

 

 

 

Adjustments

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

x The measurement is not OK. Follow the message, then select [YES] to retry.

Measurement failure.

Check speaker connection.

Retry?

YES

NO

Tip

•You can check the distance between the listening position and each speaker. See page 92.

continued

85US