[ON]

Sets the STB SYNCHRO function

 

to on.

 

 

Note

•This function is available only when you set [HDMI CONTROL] to [ON].

x[PAUSE MODE] (DVD VIDEO/DVD-R/ DVD-RW only)Selects the picture in pause mode.

[AUTO]

The picture, including subjects

 

that move dynamically, is output

 

with no jitter. Normally select this

 

position.

 

 

[FRAME]

The picture, including subjects

 

that do not move dynamically, is

 

output in high resolution.

 

 

x[TRACK SELECTION] (DVD VIDEO only)

Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, DTS, MPEG audio, or Dolby Digital format) are recorded.

[OFF]

No priority given.

 

 

[AUTO]

Priority given.

 

 

Note

•When you set the item to [AUTO], the language may change. The [TRACK SELECTION] setting has higher priority than the [AUDIO] settings in [LANGUAGE SETUP] (page 88). (Depending on the disc, this function may not work.)

•If PCM, DTS, Dolby Digital sound, and MPEG audio tracks have the same number of channels, the system selects PCM, DTS, Dolby Digital sound, and MPEG audio tracks in this order.

x[MULTI-DISC RESUME] (DVD VIDEO/ VIDEO CD only)Switches the Multi-disc Resume setting on or off.

[ON]

Stores the resume settings in

 

memory for up to 40 discs.

 

 

[OFF]

Does not store the resume settings

 

in memory. Playback restarts at

 

the resume point only for the

 

current disc in the unit.

 

 

x[AUDIO DRC] (DVD VIDEO only)

Narrows the dynamic range of the sound track. Useful for watching movies at low volume late at night.

[OFF]

No compression of dynamic

 

range.

 

 

[STANDARD]

Reproduces the sound track with

 

the kind of dynamic range that the

 

recording engineer intended.

 

 

[MAX]

Compresses dynamic range fully.

 

 

x[AUDIO (HDMI)]Selects the audio output status from the HDMI OUT jack.

[OFF]

The sound is not output from the

 

HDMI OUT jack.

 

 

[ON]

Outputs audio signals by

 

converting Dolby Digital, DTS, or

 

96 kHz/24 bit PCM signals to 48

 

kHz/ 16 bit PCM.

 

 

Note

•When you connect the unit and TV with the HDMI cord and [ON] is selected, AUDIO DRC, A/V SYNC, DYNAMIC BASS, MOVIE/MUSIC, and sound field are not applied to the sound that is output from the TV.

Adjustments and Settings Advanced

91US