x[DISTANCE (SURROUND)]

The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using the Quick Setup (page 24), the settings is automatically displayed.

0.00- 7.00 m2)/ 0 - 23 ft

Be sure to change the value in the Setup Display when you move the speakers.

[CENTER]

Set this between –6.0 dB and

0.0 dB

+6.0 dB.

(appears when you

 

set [CENTER] to

 

[YES] in the

 

[CONNECTION]

 

setting.)

 

 

 

[SUBWOOFER]

Set this between –6.0 dB and

+2.0 dB

+6.0 dB.

 

 

x[LEVEL (SURROUND)]

You can vary the level of surround speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L/R]

Set this between –6.0 dB and

0.0 dB

+6.0 dB.

(appears when you

 

set [SURROUND]

 

to [YES] in the

 

[CONNECTION]

 

setting.)

 

 

 

To adjust the volume of all the speakers at one time

Advanced

[L/R]

3.00m/10 ft1)3) (appears when you set [SURROUND] to [YES] in the

[CONNECTION]

setting.)

Surround speaker distance from the listening position can be set from 0.00 to 7.00 meters2) (0 to 23 ft).

Turn the VOLUME control on the unit, or press VOLUME +/– on the remote.x[TEST TONE]

The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)].

and Settings

1)When you perform the Quick Setup (page 24), the default settings are changed.

2)0.00 to 7.01 meters for North American models.

3)3.04 m/10 ft for North American models.

Note

•Depending on the input stream, the [DISTANCE] setting may not be effective.

•When the speaker distance setting is not in the recommended range, / ** m is displayed (**

being the number). indicates over the

recommended distance. indicates below.

x[LEVEL (FRONT)]

You can vary the level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L/R]

Set this between –6.0 dB and

0.0 dB

+6.0 dB.

 

 

[OFF] The test tone is not emitted from the speakers.

[ON] The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence.

Adjusting the speaker level by using the test tone

1 Press DISPLAY when the system is in stop mode.

The Control Menu display appears.

2 Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

continued

Adjustments

93US