Getting Started

Step 3: Performing the Quick Setup

Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the area.

"/1

C/X/x/c,

DISPLAY

1 Turn on the TV.

2 Press [/1.

Note

•Make sure that the function is set to “DVD” (page 29).

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 27).

4 Press without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

5 Press X/x to select a language, then press .

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

VIDEO SETUP

TV TYPE:

 

16:9

PROGRESSIVE (COMPONENT

16:9

4:3 OUTPUT:

4:3 LETTER BOX

BLACK LEVEL:

4:3 PAN SCAN

BLACK LEVEL (COMPONENT OUT):

OFF

PAUSE MODE:

 

AUTO

6 Press X/x to select the setting that matches your TV type, then press .

•[16:9]: For a wide-screen TV or a 4:3 standard TV with a wide-screen mode (page 51)

•[4:3 LETTER BOX] or [4:3 PAN SCAN]: For a 4:3 standard TV (page 51)

The Setup Display for the Control for HDMI function appears.

HDMI SETUP

HDMI RESOLUTION:

AUTO(1920x1080p)

CONTROL FOR HDMI:

 

ON

VOLUME LIMIT:

 

ON

YCBCR/RGB(HDMI):

 

OFF

AUDIO(HDMI):

 

OFF

JPEG RESOLUTION:

 

SD

7 Press X/x to select the setting, then press .

•[ON]: The Control for HDMI function (page 60) is set to on.

•[OFF]: The Control for HDMI function is set to off.

The Setup Display for selecting the speaker formation appears.

SPEAKER FORMATION

STANDARD

26US