After “START” appears in the front panel display, press .
The unit starts pairing and “SEARCH” flashes in the front panel display.
To cancel pairing, press SYSTEM MENU.
5
sub unit.
• To set the ID of the unit, see “To set the ID of the unit” (page 65).
• To set the ID of the S-AIR sub unit, refer to the operating instructions of the S-AIR sub unit.
3 Press SYSTEM MENU.
4 Press X/x repeatedly until “PAIRING” appears in the front panel display, then press or c.
Note
• When the wireless transmitter is not inserted in the unit, “PAIRING” cannot be selected.
Match the IDs of the unit and the S-AIR
2
Place the S-AIR sub unit that you want to pair near the unit.
Note
• Remove headphones from the surround amplifier (if connected).
1
ID A S-AIR sub unit
Pairing
To perform pairing
No transmission
ID A
S-AIR sub unit
Your room
This unit
ID A

Note

•When you turn the system off while “S-AIR STBY” is set to “STBY ON,” “S-AIR” flashes (when sound transmission between the unit and S-AIR receiver is not established), or lights up (when sound transmission between the unit and S-AIR receiver is established) in the front panel display.

Identifying the unit with a specific S-AIR sub unit (Pairing operation)

For the surround amplifier

For the S-AIR receiver

It is easy to set the same ID for the unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbors may also receive your system’s sound if IDs are the same, or you may receive sound from neighbors. To prevent this, you can identify the unit with a specific S-AIR sub unit by performing the pairing operation.

xBefore pairing

Sound transmission is established by ID (example).

Your room

Neighbor

This unit

ID A

ID A

ID A

S-AIR sub unit

S-AIR sub unit

xAfter pairing

Sound transmission is established between the paired unit and S-AIR sub unit(s) only.

Neighbor

Device Audio HDMI/External for Control

67US