Sony DAV-HDZ485 64US, 2 Insert the wireless transmitter, 1 Remove the screws and detach the slot cover, Inserting the wireless transmitter/transceiver

Inserting the wireless transmitter/transceiver

To make use of the S-AIR function, you need to insert the wireless transmitter into the unit and the wireless transceiver into the S-AIR sub unit.

•When you insert the wireless transmitter/transceiver, make sure that the AC power cord (mains lead) is not connected to a wall outlet (mains).

•Do not touch the terminals of the wireless transmitter/ transceiver.

To insert the wireless transmitter into the unit1 Remove the screws and detach the slot cover.

Rear of the unit

	SPEAKER	ANTENNA
SPEAKER	TV/VIDEO	EZW-T100
	HDMI OUT
	DMPORT	VIDEO
	COMPONENT VIDEO OUT	OUT TV/VIDEO
	Slot cover
	-T100
	EZW

•Remove the screws from the slot cover bearing the caution mark. Do not remove other screws.

•The slot cover is no longer necessary; however, keep it after detaching.

2 Insert the wireless transmitter.

Rear of the unit

	SPEAKER		ANTENNA
SPEAKER	TV/VIDEO	EZW-T100
	HDMI OUT
	DMPORT	VIDEO
	COMPONENT VIDEO OUT	OUT	TV/VIDEO

-T100 EZW

•Insert the wireless transmitter with the S-AIR logo facing up.

•Insert the wireless transmitter so that the V marks are aligned.

•Do not insert anything other than the wireless transmitter into the EZW-T100 slot.

3 Make sure to use the same screws to secure the wireless transmitter.

Rear of the unit

	SPEAKER		ANTENNA
SPEAKER	TV/VIDEO	EZW-T100
	HDMI OUT
	DMPORT	VIDEO
	COMPONENT VIDEO OUT	OUT	TV/VIDEO

•Do not use other screws to fasten the wireless transmitter.

To insert the wireless transceiver into the S-AIR sub unit

For details on installing the wireless transceiver into the S-AIR sub unit, such as a surround amplifier or S-AIR receiver, see the operating instructions of the S-AIR sub unit.

Tip

•When you change the S-AIR configuration, Sony recommends that you perform [AUTO CALIBRATION]. For details, see “Calibrating the Appropriate Settings Automatically” (page 70).

64US