5 Attach the cover.Attaching the supplied foot pads

When you place the center speaker on a rack, attach the supplied foot pads to the bottom face of the speaker. Make sure that the hole on the back of the speaker is in the right direction, as illustrated below.

Center speaker

Hole on the back of the speaker

Notes

Set both speakers to the same height.

You can install the front and surround speakers on optional speaker stands (WS-FV20 or WS-FV11).

When detaching the speakers from their stands

Insert a flathead screwdriver (not supplied) into the notch of the cover, and remove the cover from the stand.

Flathead screwdriver (not supplied)

Foot pad

Tip

When placing the front speakers or the surround speakers vertically, also attach the supplied foot pads to the bottom face of each speaker.

Note

Detach the speaker carefully to prevent pinching your fingers between the speaker and speaker stand.

38GB