5 Press ENTER.

The system starts playback from the selected number.

To turn off the Control Menu

Press DVD DISPLAY repeatedly until the Control Menu is turned off.

To search for a particular point using the time code (TIMESEARCH)

Example: If you search for the playing time of the current title on a DVD

1In Step 2, select (TIME).

“T**:**:**” (playing time of the current title) is selected.

2Press ENTER or c.

“T--:--:--” appears above “T**:**:**.”

3Input the time code using the number buttons, then press ENTER.

For example, to find a desired point at 2 hours, 10 minutes, and 20 seconds after the beginning, just enter “2:10:20.”

Notes

•The title, chapter or track number displayed is the same number recorded on the disc.

•You cannot search a scene of a VIDEO CD.

•If you play a DVD, input the playing time of the current title using the time code. If you play a CD, Super Audio CD, VIDEO CD, or MP3, input the playing time of the current track using the time code.

Tip

You can change the display to show playing time or remaining time. For details, see “Checking the Playing Time and Remaining Time” (page 39).

Viewing Disc Information

Viewing the Playing Time andRemaining Time in the FrontPanel Display

You can check disc information, such as the remaining time, total number of titles in a DVD, or tracks in a Super Audio CD, CD, VIDEO CD or MP3, using the front panel display (page 78).

DISPLAY

Press DISPLAY.

Each time you press DISPLAY while playing the disc, the display changes as shown in the charts.

36GB