Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound, set for the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level.
Select “SPEAKER SETUP” in the setup display. For details, see “Using the Setup Display” (page 61).
The default settings are underlined.
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL:
BALANCE:
TEST TONE:
To return to the default setting when changing a setting
Select the item, then press CLEAR.
xSIZE
If you do not connect centre or surround speakers, or move the surround speakers, set the parameters for CENTER and SURROUND and specify the surround speaker position and height. Since the front speaker and subwoofer settings are fixed, you cannot change them.
Position diagram
| 90 |
A | 45 A |
B | B |
| 20 |
Height diagram
C 
C
60
D D
30
FRONT YES
CENTER YES: Normally select this. NONE: Select this if no centre speaker is used.
SURROUND BEHIND (LOW): Select this if surround speakers are located in section B and D.
BEHIND (HIGH): Select this if surround speakers are located in section B and C.
SIDE (LOW): Select this if surround speakers are located in section A and D.
SIDE (HIGH): Select this if surround speakers are located in section A and C.
NONE: Select this if no surround speaker is used.
SUBWOOFER YES
Notes
•When you select an item, the sound cuts off for a moment.
•Depending on the settings of other speakers, subwoofer may be excessive.