Sony DAVLF1H 13US, – BASIC –, Started Getting, Assembling the speakers, About connecting speaker cord, To assemble the center speaker

Assembling the speakers

Attach the stands and connect the speaker cords to the center speaker, front speakers, and surround speakers.

About connecting speaker cord

The connector and color tube of the speaker cords are the same color as the label of the speaker to be connected.

Started Getting

Gray

Color tube

(+)

(–)

Black

Do not catch the speaker cord insulation in the SPEAKER jack.

– BASIC –

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord, such as shown below.

Stripped speaker cord is	Stripped cords are touching each
touching another speaker	other due to excessive removal of
terminal.	insulation.

Note

•Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords are reversed, the sound will lack bass and may be distorted.

To assemble the center speaker

Use the parts illustrated below.

Center speaker (1)	Adjuster (1)	Center speaker	Speaker cord	Screws
		base (1)	(green) (1)	(silver, large) (2)

Label on the rear of the

speaker: Green

Tip

• You can install the center speaker on a wall using an optional kit (not supplied).

continued

13US