Sony DAVLF1H 88US, [AUTO, 5 Press, CALIBRATION], 4 Press X/x to select, 2 Press FUNCTION +/– repeatedly until, “DVD” appears in the front panel display

1 Connect the calibration mic to the ECM-AC1 jack on the rear of the subwoofer, and set it up at the ear level using a tripod, etc. (not supplied).

ECM-AC1	TV	VIDEO 1	VIDEO 2	TV	VIDEO 1
	AUDIO IN	AUDIO IN	AUDIO IN	DIGITAL IN	DIGITAL IN
					COAXIAL
				L

	OPTOCAL	VIDEO 2
R		DIGITAL
		IN
		COAXIAL

Rear of the subwoofer

Calibration mic

The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic.

Note

•Place the calibration mic so that the “FRONT” side of it is pointed toward the front speakers.

2 Press FUNCTION +/– repeatedly until“DVD” appears in the front panel display.3 PressDISPLAY when the system is in stop mode.

The Control Menu appears.

4 Press X/x to select		[AUTO
CALIBRATION].
	1 ( 4 4 )
	3 ( 2 8 )	DVD VIDEO
	T 0 : 0 3 : 0 4
	AUTO CALIBRATION
	START

5 Press .

The [AUTO CALIBRATION] display appears.

AUTO CALIBRATION

Connect calibration mic. Start measurement?

YES

NO

6 Press X/x to select [YES], then press to start [AUTO CALIBRATION].

Be quiet during the measurement.

Measuring. Please wait a moment.

Note

•Avoid being in the measurement area and making noise during the measurement (about 1 minute), to avoid measurement failure. During the measurement, test signals are output from the speakers.

•Reflections from walls or the floor may affect measurements.

•When you install the surround speaker (L) to the right position, the system set the “SL SR REVERSE” setting (page 99) to “ON” automatically.

88US