Sony DAVLF1H 98US, x[TEST TONE], x[LEVEL (FRONT)], x[LEVEL (SURROUND)], TONE], then press or c, 5 Press X/x repeatedly to select [TEST

•Depending on the input stream, the [DISTANCE] setting may not be effective.

•When the speaker distance setting is not in the recommended range, / ** m is displayed (**

being the number). indicates over the

recommended distance. indicates below.

x[LEVEL (FRONT)]

You can vary the level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L/R]	Set this between –15.0 dB and
0.0 dB	+10.0 dB in 1.0 dB increments.
[CENTER]	Set this between –15.0 dB and
0.0 dB	+10.0 dB in 1.0 dB increments.
(appears when you set
[CENTER] to [YES] in
the [CONNECTION]
setting.)
[SUBWOOFER]	Set this between –15.0 dB and
0.0 dB	+10.0 dB in 1.0 dB increments.

x[LEVEL (SURROUND)]

You can vary the level of surround speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L/R]	Set this between –15.0 dB and
0.0 dB	+10.0 dB in 1.0 dB increments.

(appears when you set [SURROUND] to [YES] in the

[CONNECTION]

setting.)

To adjust the volume of all the speakers at one time

Press VOLUME +/– on the remote or touch VOLUME +/– (touch panel button) on the control unit.

x[TEST TONE]

The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)].

[OFF] The test tone is not emitted from the speakers.

[ON] The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence.

Adjusting the speaker level by using the test tone

C/X/x/c,

DISPLAY

1 Press DISPLAY when the system is in stop mode.

The Control Menu appears.

2 Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

3 Press X/x to select [CUSTOM], then press .

The Setup Display appears.

4 Press X/x repeatedly to select [SPEAKER SETUP], then press or

c.

5 Press X/x repeatedly to select [TESTTONE], then press or c.6 Press X/x repeatedly to select [ON], then press .

You will hear the test tone from each speaker in sequence.

7 From your listening position, adjust the value of [LEVEL (FRONT)] or [LEVEL (SURROUND)] using C/X/x/c.

The test tone is emitted from only the speaker which you are adjusting.

8 Press when you have finished making adjustments.

98US