![](/images/backgrounds/198987/198987-148101x1.png)
Making a disc copy – Disc Duplicating
Making a disc copy
You can make a copy of a finalized disc.
1 | Turn on your computer and allow | |
2 | Windows to load. |
|
Connect the AC adaptor to your | ||
3 | camcorder. |
|
Set the mode dial to | (Play/Edit). | |
4 | Turn the power on your camcorder by | |
| pressing the POWER button for a few | |
5 | seconds. |
|
Insert a recorded and finalized disc into | ||
6 | your camcorder. |
|
Connect the (USB) jack of the | ||
| camcorder and the | (USB) port of the |
computer using the USB cable supplied with your camcorder.
USB port
USB cable (supplied)
USB jack
7 Start the ImageMixer software on your computer.
8 Click on the left of the window.
9 Click .
The confirmation dialog box appears.
10 Click [OK].
11 When the copy completion message appears, remove the disc and insert a new disc into your camcorder.
12 Click [OK].
Copying of data from your computer to the new disc starts. When the disc copy operation is completed, a dialog box asking if you want to make an additional copy appears.
13 If you want to make an additional copy, click [OK].
The making of an additional copy starts. If you do not want to make an additional copy, click [Cancel] to end the procedure.
14 Remove the disc following the instructions given in the
Notes
•It may take some time to save the scene depending on the recording mode (page 32) and the length of the movie.
•You cannot make a copy of an unfinalized disc.
•You cannot copy a
•The ACCESS lamp lights up when duplicating a disc. During the duplication, you cannot remove the disc.
•Using
Tip
To use the disc with other DVD authoring applications, you must copy movies to your PC using ImageMixer, and have a file exporting procedure available. For details, see the ImageMixer
computer your on recordings the discs/editing Viewing/duplicating
101