Open the LCD screen while pressing OPEN.

Step 4 Setting the date and time

Set the date and time when you use your camcorder for the first time. Set the geographical area, then daylight savings time([DST]), the year, the month, the day, the hour and the minute, in that order. If you do not set the date and time, the [CLOCK SET] display appears whenever you turn on your camcorder or change the mode dial. If you do not use your camcorder for about 3 months, the date and time settings may be cleared from memory because the built-in rechargeable battery in your camcorder will have been discharged during that time. In that case, charge the built-in rechargeable battery by connecting the AC adaptor, and set the date and time again (page 16, 134).

Started Getting

OPEN button

SETUP button

1

2 Turn the power on by pressing the POWER button for a few seconds. The CLOCK SET display appears.

CLOCK SET

AREA 26 GMT -5.0

New Yor k,Bogota

DST OFF

DATE Y M D

:

[ ENTER ] : NEXT ITEM

3 Use the multi-selector to select the desired geographical area.

Multi-selector

FARNEAR

Select with V/v/B/b and press the button in the center to confirm your selection.

23