On the battery pack
•Before changing the battery pack, slide the POWER switch to OFF (CHG).
•The CHG (charge) lamp flashes during charging, or BATTERY INFO (p.47) will not be correctly displayed under the following conditions.
–The battery pack is not attached correctly.
–The battery pack is damaged.
–The battery pack is fully discharged. (For BATTERY INFO only.)
•The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder, even when the power cord is disconnected from the wall outlet.
•We recommend that you use an
On the charging/recording/playback time
•Times measured with the camcorder at 25 °C (77°F).
•Available recording and playback time will be shorter when you use your camcorder in low temperatures.
•The available recording and playback time will be shorter depending on the conditions under which you use your camcorder.
On the AC Adaptor
•Connect the AC Adaptor to an easily accessible wall outlet close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet.
•Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
•Do not
PRECAUTION
•The set is not disconnected from the AC power source (house current) as long as it is connected to the wall outlet, even if the set itself has been turned off.
23