Warning indicators and messages (continued)

Access error.

•An error occurred during reading or writing the disc.

x “Memory Stick Duo”

Reinsert the Memory Stick.

•Reinsert the “Memory Stick Duo” a few times. If even then the indicator flashes, the “Memory Stick Duo” can be damaged. Try with another “Memory Stick Duo.”

This is a read-only Memory Stick.

• Insert a writable “Memory Stick Duo.”

Incompatible type of Memory Stick.

•A type of “Memory Stick Duo” incompatible with your camcorder is inserted (p.132).

This Memory Stick is not formatted correctly.

•Check the format, then format the “Memory Stick Duo” with your camcorder if necessary (p.77, 132).

Cannot record. The Memory Stick is full.

• Delete unnecessary images (p.86).

Cannot record still images on Memory

Stick. (p.132)

- The Memory Stick is locked. Check the tab. (p.132)

Cannot playback. Reinsert the Memory Stick. (p.30)

Cannot record. Reinsert the Memory Stick. (p.30)

Memory Stick has been removed. Process canceled.

Memory Stick folders are full.

•You cannot create folders exceeding 999MSDCF. You cannot create or delete created folders using your camcorder.

•You will have to format the “Memory Stick Duo” (p.77), or delete them using your computer.

Do not eject the Memory Stick during writing.

Insert a Memory Stick or change STILL MEDIA to DVD. (p.30, 35, 41)

Cannot record still pictures.

No more still pictures during movie recording.

•You are trying to record three or more still images, the maximum number that can be recorded at one time, in recording with the Dual Rec function (p.45).

No more still pictures during movie recording

•When using the Dual Rec function, do not eject the “Memory Stick Duo” from your camcorder from after recording a movie is finished until the still images are recorded on the “Memory Stick Duo.”

Cannot save still picture.

•When using the Dual Rec function, do not remove the still image recording media from the camcorder until disc recording is finished and still image recording is complete (p.45).

x PictBridge compliant printer

Check the connected device.

•Switch off the printer and switch it on again, then disconnect the USB cable (supplied) and reconnect it.

126