You cannot change the zoom speed with the zoom buttons 9 on the LCD frame.

To play back a series of

 

still images (Slide show) ...........

qk

Touch on the still image playback screen.

The slide show begins from the selected image.

Touch to stop the slide show. To restart,

touch again.

You can touch to set continuous slide show playback. The default setting is [ON] (continuous playback).

You cannot operate playback zoom during slide show.

Recording/playback

To check the remaining battery ....

ql

Set the POWER switch to OFF (CHG), then press DISP/BATT INFO ql. If you press this button once, BATTERY INFO appears on the screen for about 7 seconds. Press the button whileBATTERYINFOappearsonthescreen to extend the indication to the 20-second maximum.

Remaining battery (approx.)

81

85

Recording capacity (approx.)

To turn off the operation confirmation
beep ....................................

qk

See [BEEP] on page 80.

 

To initialize the settings (RESET)

w;

..........................................

Press RESET w;to initialize all the settings, including settings for date and time. (Setup items customized on Personal Menu are not initialized.)

Other part names and functions

5Built-in 4ch microphone

When an external microphone (optional) is connected, it takes precedence over the internal microphone (p.98).

qf Remote sensor

Point the Remote Commander (p.51) towards the remote sensor to operate your camcorder.

qg Recording lamp

The recording lamp lights up in red during recording (p.80).

The lamp flashes when the remaining capacity for the battery or disc is running low.

qh Speaker

Sounds come out from the speaker while playing back.

• For how to adjust the volume, see page 43.

47