You can select the number of thumbnails that appear on the VISUAL INDEX screen. Thumbnail Glossary (p.143)
BZOOM LINK
Change the number of thumbnails (6 or 12) with the zoom lever on your camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
*You can operate with the zoom buttons on the LCD frame or on the Remote Commander.
MOVIE PBBecause the default setting is [ON], when
you select tab on the VISUAL INDEX screen the first 5 seconds of each movie displayed on the screen are played back in sequence.
•Set to [OFF] to conserve battery power.
•Playback for the movie stops after repeating 5 times.
REMAININGBAUTO
Displays the remaining disc indicator for about 8 seconds in situations such as those described below.
–When your camcorder recognizes the remaining disc capacity with the POWER switch set to (Movie).
–When you press DISP/BATT INFO to switch the indicator from off to on with the POWER switch to (Movie).
–When the recordable time for movies is less than 5 minutes.
–When you start recording from the line input.
ON
Always displays the remaining disc indicator.
The default setting is [ON] so that you can use the supplied Remote Commander (p.51).
•Set to [OFF] to prevent your camcorder from responding to a command sent by other device’s remote control.
REC LAMP (Recording lamp)The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].)
BEEPBON
A melody sounds when you start/stop recording, or operate the touch panel.
OFF
Cancels the melody.
DISP OUTPUTBLCD PANEL
Shows displays such as the counter on the LCD screen and in the viewfinder.
Shows the display also on the TV screen.
SETUP ROTATEBNORMAL
Scrolls the setup items downwards by touching .
OPPOSITE
Scrolls the setup items upwards by touching
.
80