For DCR-HC32E/HC33E:

You cannot record still images on the “Memory Stick Duo” using [WIDE SELECT] mode (p. 42).

For DCR-HC39E/HC42E/HC43E:

When [SMTH INT.REC] is activated, still images cannot be recorded on a “Memory Stick Duo” during tape recording.

The recording angle differs depending on the POWER switch setting position.

The recording angle when the POWER switch is set to CAMERA-MEMORY is wider than when it is set to CAMERA-TAPE.

You cannot record a smooth transition on a tape from the last recorded scene to the next.

Note the following.

Perform END SEARCH (p. 29).

Do not remove the cassette. (The picture will be recorded continuously without a break even when you turn the power off.)

Do not record pictures in SP mode and LP mode on the same tape.

Avoid stopping then recording a movie in the LP mode.

The shutter sound is not heard when you record a still image.

• Set [BEEP] to [ON] (p. 54).

The external flash (optional) does not work.

• The power of the flash is not turned on, or the flash is not attached correctly.

[END SEARCH] does not work.

The cassette was ejected after recording (p. 29).

The cassette is new and has nothing recorded.

[END SEARCH] does not work correctly.

• There is a blank section in the beginning or middle of the tape. This is not a malfunction.

Smooth interval recording stops/[Smooth interval rec discontinued due to error.] appears and recording stops. (DCR-HC39E/HC42E/HC43E)

The video head may be dirty. Use a cleaning cassette (optional).

Try again from the beginning.

Use a Sony mini DV cassette.

Troubleshooting

Continued 85