•The computer does not recognize the “Memory Stick Duo” during camcorder operations such as tape playback or editing. Finish any camcorder operations before connecting the camcorder to the computer.

The “Memory Stick Duo” icon ([Removable Disk] or [Sony Memory Stick]) does not appear on the computer screen.

•Insert a “Memory Stick Duo” into your camcorder.

•Disconnect the USB device other than the keyboard, the mouse, and the camcorder from the computer.

•Slide the POWER switch down to turn on the PLAY/EDIT lamp on your camcorder, set [USB-PLY/EDT] to [STD-USB] (p. 53).

•The computer does not recognize the “Memory Stick Duo” during camcorder operations such as tape playback or editing. Finish camcorder operations before connecting the camcorder to the computer.

The image does not appear on the screen of the Windows computer when using the USB cable.

•The USB driver has been registered incorrectly as the computer was connected to your camcorder before the installation of the USB driver was completed. Follow the procedure below to install the USB driver correctly.

For Windows 98/Windows 98SE/Windows Me

When copying or playing the pictures on a tape using a computer, the operation is not guaranteed on Windows 98.

1 Check that your camcorder is connected to a computer.

2 Right-click [My Computer], then click [Properties]. The [System Properties] screen appears.

3 Click the [Device Manager] tab.

4 If the devices below are already installed, right-click them, then click [Remove] to delete them.

For copying and viewing pictures recorded on a tape

–[USB Audio Device] in the [Sound, video and game controllers] folder

–[USB Device] in the [Other devices] folder

–[USB Composite Device] in the [Universal Serial Bus Controller] folder

For copying and viewing pictures recorded on a “Memory Stick Duo”

–[? Sony Handycam] or [? Sony DSC] with a “?” mark in the [Other devices] folder 5 When the [Confirm Device Removal] screen appears, click [OK].

6Turn off the power of your camcorder, disconnect the USB cable, then restart the computer.

7Place the supplied CD-ROM in the disc drive of your computer.

8 Follow the steps below and try to install the USB driver again. 1 Double-click [My Computer].

2 Right-click [PICTUREPACKAGE] (Disc drive)*.

* Drive names (such as (E:)) may vary depending on the computer.

Troubleshooting

Continued 93