Sony DCR-HC54, DCR-HC52 manual Charging the battery pack

Step 2: Charging the battery pack

1 2

2

1

3

	With the v mark facing
Battery pack	down

POWER switch

DC IN jack

4

To the wall outlet (wall socket)

AC Adaptor

Power cord (Mains lead)

You can charge the “InfoLITHIUM” battery pack (H series) (p. 61) after attaching it to your camcorder.

bNotes

•You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.

1 Align the terminals of the battery pack and your camcorder 1, then attach the battery pack and click it into place 2.

2 Slide the POWER switch in the direction of the arrow to OFF(CHG) (The default setting).

3 With the v mark on the DC plug facing down, connect the AC Adaptor to the DC IN jack on your camcorder.

4 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket).

CHG (charge) lamp

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack.

bNotes

•Disconnect the AC Adaptor from the DC IN jack holding both the camcorder and the DC plug.

12