Sony DCR-HC54, DCR-HC52 Searching for the starting point, Searching manually

Searching for the starting point

Make sure that the CAMERA lamp	1 Touch
lights up (p. 21).
	[MENU].

t [PAGE1] t

Searching for the last scene of the most recent recording

(END SEARCH)

[END SCH] (END SEARCH) will not work once you eject the cassette after you have recorded on the tape.

Touch t [PAGE1], then touch [END SCH].

60min			0:00:00
PAGE1	PAGE2
SPOT	FOCUS	SPOT	DISP
FOCUS		METER	GUIDE
MENU	SCENE	END	EXPO–
	SEL.	SCH	SURE

Touch here again to cancel the operation.

The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished.

bNotes

•[END SCH] will not work correctly when there is a blank section between recorded sections on the tape.

zTips

•This operation is also available when the POWER switch is set to PLAY/EDIT.

2 Select		(CAMERA SET) with
	/	, then touch [EXEC].
3 Select [EDITSEARCH] with			/
	, then touch [EXEC].

4 Select [ON] with / ,

then touch [EXEC] t .

60min STBY 0:00:00

EDIT GUIDE FN

5 Touch and hold (to go

backward)/ (to go forward) and release it at the point where you want the recording to start.

Reviewing the most recently recorded scenes (Rec review)

You can view about 2 seconds of the scene recorded just before you stopped the tape.

Searching manually

(EDIT SEARCH)

You can search for the start point to start the next recording while viewing the pictures on the screen. The sound is not played back during the search.

1 Touch t [PAGE1] t

[MENU].

2 Select		(CAMERA SET) with
	/	, then touch [EXEC].

26