Dubbing a tape
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (optional) to
DV IN/OUT and to DV IN of the DV products. With
(1)Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder.
(2)Set the input selector on the VCR to DV IN if it is available. Refer to the operating instructions of your VCR for more information.
(3)Set the POWER switch to VCR.
(4)Play back the recorded tape on your camcorder.
(5)Start recording on the VCR.
Refer to the operating instructions of your VCR for more information.
DV S VIDEO
i.LINK cable | DV IN |
(DV connecting cable) (optional) |
|
DV IN/OUT
: Signal flow
When you have finished dubbing a tape
Press xon both your camcorder and the VCR.
You can connect one VCR only using the i.LINK cable (DV connecting cable). See page 126 for more information about i.LINK.
The following functions do not work during digital editing :
–Picture effect
–Digital effect
–PB ZOOM
If you record a playback pause picture via the DV IN/OUT jack
The recorded picture becomes rough. Also, when you play back recorded pictures on other video equipment, the picture may jitter.
74