Viewing images using your computer – USB Streaming (Windows users only)

Notes

•Operations are not guaranteed if you connect 2 or more pieces of USB equipment to a single computer at the same time or when using a hub.

•Depending on the type of USB equipment used simultaneously, some equipment may not operate.

•Operations are not guaranteed for all the recommended computer environments mentioned above.

•Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

•Pentium is either registered trademark or trademark of Intel Corporation.

•All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies.

•Furthermore, “™” or “®” are not mentioned in this manual.

Installing the USB driver

Before connecting your camcorder to your computer, install the USB driver to the computer. The USB driver is contained together with application software for viewing images on the CD-ROM supplied with your camcorder.

Be sure to follow the steps before connecting the USB cable to your computer. Connect the USB cable in step 8.

If the USB driver has been registered incorrectly because your computer was connected to your camcorder before installing the USB driver, reinstall the USB driver following the procedure on page 99.

For Windows 98 SE, Windows Me, Windows 2000 Professional and Windows XP users

Log in with permission of Administrator (for Windows 2000 Professional and Windows XP users).

(1) Turn on your computer and allow Windows to load.

(2) Insert the supplied CD-ROM into the CD-ROM drive of your computer. The application software screen appears.

(3) Move the cursor to “USB Driver” and click. The USB driver installation starts.

98