Viewing images using your computer – USB Streaming (Windows users only)

(4) Follow the on-screen messages to install the USB driver.

(5) Connect the AC power adaptor to your camcorder and then to a wall outlet.

(6) Set the POWER switch to CAMERA or VCR (DCR-TRV140)/PLAYER (CCD-TRV608).

(7) Select USB STREAM to ON in in the menu settings (p. 111).

(8)With the CD-ROM inserted, connect the USB jack on your camcorder to the USB connector on your computer using the supplied USB cable.

Your computer recognises the camcorder, and the Windows Add Hardware Wizard starts.

To the USB connector

Computer

To the (USB) jack USB cable (supplied)

Connection PC

(9)Follow the on-screen messages so that the Add Hardware Wizard recognizes that the USB drivers have been installed. The Add Hardware Wizard starts three times because three different USB drivers are installed. Be sure to allow the installation to complete without interrupting it.

If the “Files Needed” screen appears (Windows 2000 Professional and Windows XP users)

Set the CD-ROM on the CD-ROM driver then select “Browse....” t “My Computer”

t“ImageMixer” t “sonyhcb.sys”, and click the “OK” button.

The installation is completed, proceed to Installing “PIXELA ImageMixer Ver.1.0 for Sony” on page 101.

If you cannot install the USB driver

The USB driver has been registered incorrectly as your computer was connected to your camcorder before installing the USB driver. Perform the following procedure to correctly install the USB driver.

Step 1 Uninstall the incorrect USB driver

1Turn on your computer and allow Windows to load.

2Connect the USB jack on your camcorder to the USB connector on your computer using the supplied USB cable.

To the USB connector

To the (USB) jack

Computer

USB cable (supplied)

99