Sony DCR-TRV230 (2), Notes, When fading out [b], (1) When fading in [a], Using the fader function, Note on the bounce function, To cancel the fader function

Using the fader function

(1) When fading in [a]

In the standby mode, press FADER until the desired fader indicator flashes.

When fading out [b]

In the recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows:

FADER t M.FADER t BOUNCE t MONOTONE t OVERLAP t WIPE t DOT

The last selected fader mode is indicated first of all.

(2) Press START/STOP. The fader indicator stops flashing.

After the fade in/out is carried out, your camcorder automatically returns to the normal mode.

1

FADER

FADER

To cancel the fader function

Before pressing START/STOP, press FADER until the indicator disappears.

Notes

•Theoverlap,wipeanddotfunctionsworkonlyfortapesrecordedintheDigital8 system.

•Youcannotusethefollowingfunctionswhileusingthefaderfunction.Also,you cannotusethefaderfunctionwhileusingthefollowingfunctions:

–Digitaleffect

–Low lux mode of PROGRAM AE (Overlap, wipe, or dot function only)

–SuperNightShot

–Tapephotorecording

Before operating the overlap, wipe, or dot function

Yourcamcorderstorestheimageonthetape.Astheimageisbeingstored,theindicator flashesquickly,andtheimageyouareshootingdisappearsfromthescreen.Depending onthetapecondition,theimagemaynotberecordedclearly.

Note on the bounce function

You can use this function when D ZOOM is set to OFF in the menu settings.

38