Sony DCR-TRV230 image, – MEMORY MIX, Recording superimposed images on a “Memory Stick” as a still, Superimposing a still image in the “Memory Stick” on an image

Superimposing a still image in the “Memory Stick” on an image

– MEMORY MIX

Recording superimposed images on a “Memory Stick” as a stillimage

Before operation

Insert a “Memory Stick” is recorded still images into your camcorder.

(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the left position.

(2) Press MEMORY MIX in the standby mode.

The last recorded or last composed image appears on the lower part of the screen as a thumbnail image.

(3) Press MEMORY+/– to select the still image you want to superimpose.

To see the previous image, press MEMORY –. To see the next image, press MEMORY+.

(4) Turn the SEL/PUSH EXEC dial to select the desired mode. The mode changes as follows:

M. CHROM y M. LUMI y C. CHROM (5) Press the SEL/PUSH EXEC dial.

The still image is superimposed on the moving image. (6) Turn the SEL/PUSH EXEC dial to adjust the effect.

M. CHROM	– The color (blue) scheme of the area in the still image which is
	to be swapped with a moving image
M. LUMI	– The color (bright) scheme of the area in the still image which
	is to be swapped with a moving image
C. CHROM	– The color (blue) scheme of the area in the moving image
	which is to be swapped with a still image

The fewer bars there are on the screen, the stronger the effect. (7) Press PHOTO deeper to start recording.

2		1	V	O
				F
MEMORY MIX			C			C
					F
		POWER	R		(
						H
						G
						)
			M	M	A	C
			E	M
		O
		YR		E
			R
			A
M. CHROM
100–0021	4
			M. LUMI

Still image

100–0021

5	M. LUMI I I I • • • •
3

100–0021

6 M. LUMI I • • • • • •

100–0021

operations Stick” “Memory

101