OPEN
DSPL/BATT INFO
POWER switch
b Note
• If you do not use the battery pack for a long time, use up the battery pack completely before storing it. See page 82 about storage of the battery pack.
To check the remaining battery – Battery Info
Set the POWER switch to (CHG) OFF.
Lift up the viewfinder.
1
2
3 Slide the battery pack out in the direction of the arrow while pressing the BATT (battery) release button down.
After charging the battery
The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack.
To remove the battery pack
POWER switch
BATT (battery) release button

You can check the battery’s current charge level and its current remaining recording time both during charging or when the power is turned off.

1Set the POWER switch to (CHG) OFF.

2Press OPEN and open the LCD panel.

3Press DSPL/BATT INFO.

The battery information appears for about 7 seconds.

Keep the button pressed to view it for about 20 seconds.

 

 

BATTERY INFO

 

 

BATTERY

CHARGE

LEVEL

0%

 

 

 

50%

 

 

100%

 

 

 

 

 

 

 

 

 

 

REC TIME AVAILABLE

LCD SCREEN: 81 min

VIEWFINDER: 112 min

ABattery charge level: Displays approximate remaining amount of power left in the battery pack.

BApproximate possible recording time using the LCD panel.

CApproximate possible recording time using the viewfinder.

Charging time

Approximate number of minutes required when you fully charge a fully discharged battery pack at 25°C (77°F). (10 – 30°C (50 – 86°F) recommended.)

Battery pack

NP-FM30 (supplied)

145

NP-FM50150

NP-QM71/QM71D 260

NP-QM91/QM91D 360

Recording time when recording with the LCD screen on

Approximate number of minutes available when you use a fully charged battery pack at 25°C (77°F).

started Getting

,continued

Getting started 13