For TRV255E/265E:

A/V OUT jack

Connecting with an i.LINK cable

i.LINK cable (optional)

i.LINK jack

DV Interface

Yellow

White

A/V connecting cable (supplied) VCRs

Red

Signal flow

*Pictures can be reproduced more faithfully by using an S video cable (optional). When there is an S video jack on the device to be connected, connecting the S video cable (optional) to the S video jacks on both your camcorder and the device instead of using the yellow plug is recommended.

The audio will not be output when you connect with the S video plug alone.

**For TRV255E:

Your camcorder does not accept input data from the connected device. It can only output data from the DV Interface.

bNotes

•Use the A/V connecting cable to connect your camcorder to other devices. Before connecting,

make sure the [DISPLAY] setting in the (OTHERS) menu is set to [LCD] (the default

setting) (p. 60).

•For TRV228E/428E:

When you are connecting your camcorder to stereo device, connect the audio plug of the A/V connecting cable to the left (white) jack on the VCR.

•For TRV255E/265E:

When you are connecting your camcorder to monaural device, connect the yellow plug of the A/V connecting cable to the video jack, and the red (right channel) or the white (left channel) plug to the audio jack on the VCR.

To use an i.LINK cable for connection

For TRV265E:

Use an i.LINK cable (optional) to connect your camcorder to other device via the DV Interface. The video and sound signals are transmitted digitally, producing high quality pictures. Note that you cannot record the picture and sound separately. For details, see page 83.

62Dubbing/Editing