To cancel the operation

Touch [CANCEL].

bNotes

•The END SEARCH function will not work correctly when there is a blank section between recorded sections on the tape.

•For DCR-TRV460:

The END SEARCH function does not work for the

tapes recorded on other devices in the Hi8 /

standard 8 mm system.

zTip

•You can do this operation also by selecting [END SEARCH] in the menu setting. When PLAY/EDIT mode is selected, you can do this operation by

selecting [END SEARCH] short-cut on . (p. 59)

Searching manually – EDIT

SEARCH

You can search for the start point while viewing the pictures on the screen. The sound is not played back during the search.

1 Slide the POWER switch to select the CAMERA-TAPE mode.

2 Touch .

60min STBY 0:00:00

EDIT

3 Keep touching (to go

backward)/ (to go forward) and release it at the point where you want the recording to start.

bNote

•For DCR-TRV460:

The EDIT SEARCH function does not work for the

tapes recorded on other devices in the Hi8 /

standard 8 mm system.

Reviewing the most recently recorded scenes – Rec review

You can view a few seconds of the scene recorded just before you stopped the tape.

1 Slide the POWER switch repeatedly to select the CAMERA-TAPE mode.

2 Touch .

60min

STBY

0:00:00

EDIT

3 Touch once.

The last few seconds of the most recently recorded scene are played back. Then, your camcorder is set to the standby mode.

bNote

•For DCR-TRV460:

The Rec review function does not work for the tapes

recorded on other devices in the Hi8 /standard

8 mm system.

Recording

Recording 45