INT. REC-STL

This function is useful to observe the movement of clouds or the changes of daylight. Your camcorder will shoot a still image at a selected interval and record it on a “Memory Stick.”

[a]

[a]

[a]

[b] [b]

a:Shooting time

b:Interval

1Touch .

2Select a desired interval time (1, 5 or 10 minutes), then touch .

3Touch [ON], then touch .

GOFF

To deactivate interval recording.

ON () To record still images on a “Memory Stick” in the selected interval.

4Touch . flashes.

5Press PHOTO fully.

stops flashing and the Interval photo recording starts. To cancel interval photo recording, select [OFF] in step 3.

DEMO MODE

When you remove a cassette and “Memory Stick” from your camcorder, and select the CAMERA-TAPE mode, you can view the demonstration in about 10 minutes.

GON

Select to see an overview of the functions available such as when you

 

are using this camcorder for the first time.

 

 

OFF

Select when you do not intend to use the DEMO MODE.

 

 

bNote

• You cannot view the demonstration only when the NIGHTSHOT PLUS switch is set to ON.

zTips

•The demonstration will be suspended in situations such as those described below.

–When you touch the screen during the demonstration. (The demonstration starts again in about 10 minutes.)

–When a cassette or “Memory Stick” is inserted.

–When a mode other than CAMERA-TAPE is selected.

•If [A.SHUT OFF] is set to [5 min] when the camcorder is used on the battery pack, the power will be turned off after approximately 5 minutes (p. 81).

PRINT

See page 101 for details.

72Using the Menu