USB-PLY/EDT

You can connect a USB cable (supplied) to your camcorder, and view the picture on the tape or “Memory Stick” in your camcorder on your computer. For details, refer to the “Computer Applications Guide.”

 

 

 

GSTD-USB

Select to view the picture on the “Memory Stick.”

 

 

 

 

 

 

 

 

PictBridge

Select to connect the PictBridge compliant printer (p. 101).

 

 

 

 

 

 

 

 

USB STREAM

Select to view the picture on the tape.

 

 

 

 

 

 

 

 

 

 

 

 

DATA CODE

 

 

 

 

 

 

 

 

 

 

GOFF

Select not to display date, time and the camera settings data during

 

 

 

 

playback.

 

 

 

 

 

 

 

 

 

DATE/TIME

Select to display the date and time during playback (p. 54).

 

 

 

 

 

 

 

 

CAMERA DATA

Select to display the camera settings data during playback (p. 54).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMAINING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GAUTO

Select to display the remaining tape indicator for about 8 seconds:

 

 

 

 

• After you select the CAMERA-TAPE mode with the cassette

 

 

 

 

inserted, and your camcorder calculates the remaining amount of

 

 

 

 

tape.

 

 

 

 

 

• When you touch

(play/pause).

 

 

 

 

 

 

 

 

ON

Select to always display the remaining tape indicator.

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE CTRL

 

 

 

 

 

 

 

 

 

 

GON

Select when using the Remote Commander supplied with your

 

 

 

 

camcorder.

 

 

 

 

 

 

 

 

 

OFF

Select to deactivate the Remote Commander to prevent your

 

 

 

 

camcorder from responding to a command sent by another VCR

 

 

 

 

remote control unit.

 

 

 

 

 

 

 

bNote

•The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes.

REC LED

GON

Select to turn on the camera recording lamp on the front of your

 

camcorder during recording.

 

 

80Using the Menu