Sony BEEP, DISP OUTPUT, SETUP ROTATE, REC LAMP (Recording lamp)

• When the remaining capacity of the disc is

less than 5 minutes for (Movie) or 30 images for (Still).

• When you start recording from the line input.

ON

Always displays the remaining disc indicator.

• The setting returns to [OFF] when you have the power source disconnected from your camcorder for more than 5 minutes.

DISC REMAIN

AUTO

Displays the remaining disc indicator for about 8 seconds in situations such as those described below.

STANDARD SET (continued)

DATE/TIME
		REMOTE CTRL (Remote control)
		(Except for DCR-DVD92E/DVD602E)
		The default setting is [ON] so that you can
		use the Remote Commander (p. 41).
	 Date	• Set to [OFF] to prevent your camcorder
		from responding to a command sent by other
	 Time
		equipment’ remote control.
• appears for an image recorded using a flash.		• The setting returns to [ON] when you have
		the power source disconnected from your
•	The data code is displayed on the TV screen if
		camcorder for more than 5 minutes.
	you connect your camcorder to a TV.
•	The indicator toggles through the following
		REC LAMP (Recording lamp)
	sequence as you press DATA CODE on
	the remote commander: DATE/TIME 	The camera recording lamp will not light
	CAMERA DATA  OFF (no indication)
		up during recording when you set this to
	(Except for DCR-DVD92E/DVD602E).
		[OFF]. (The default setting is [ON].)
•	Depending on the disc condition, Bars [--:--:--]

appear.

BEEP

ON

A melody sounds when you start/stop recording, or operate the touch panel.

OFF

Cancels the melody.

DISP OUTPUT

• When you check the disc remaining by		LCD PANEL
sliding the POWER switch down to
(Movie) or (Still).		Shows displays such as the counter on the
• When you set the POWER to	(Movie)	LCD screen and in the viewfinder.
or (Still), then press the DISP/BATT		V-OUT/PANEL
INFO to switch the indicator off to on.

Shows the display also on the TV screen.

SETUP ROTATE

NORMAL

Scrolls the setup items downwards by touching .

OPPOSITE

Scrolls the setup items upwards by touching .

68