Step 2: Charging the battery pack
You can charge the battery after attaching the “InfoLITHIUM” battery pack (P series) (p.107) to your camcorder.
DC IN jack cover
DC IN jack
CHG lamp
Power switch 
Battery 
3Connect the AC Adaptor to the DC IN jack on your camcorder.
Open the DC IN jack cover to connect the AC Adaptor.
DC IN jack cover
Match the mark
on the DC plug with
mark on your 
camcorder.
Started Getting
| DC plug |
Mains lead |
|
To the wall socket | AC Adaptor |
|
1Slide the battery pack in the direction of the arrow until it clicks.
2Slide the POWER switch in the direction of the arrow to set it to OFF (CHG) (The default setting).
4Connect the AC Adaptor to the wall socket using the mains lead.
The CHG (charge) lamp lights up and charging starts.
5The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack on your camcorder.
Disconnect the AC Adaptor holding both your camcorder and the DC plug.
17