CARE AND MAINTENANCE
To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically.
When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result.
|
|
| After 720 hours of use |
|
FILTER INDICATOR LIGHT |
| Care Cycle | ||
| (30days × 24hours = 720) |
| ||
|
|
|
|
|
The Filter Indicator Light will illuminate as a reminder to perform maintenance of the Back Panel, Sensors, and Humidifying Filter. The Indicator Light will turn on after approximately 720 hours of use.
After performing maintenance, reset the Filter Indicator. Plug the unit in, turn power ON, and press the RESET button for 3 seconds. The Filter Indicator Light will go off. Even if the Filter Indicator Light is already off, the RESET but- ton should be pressed to reset the maintenance timer.
ENGLISH
BACK PANEL and SENSORS
Care Cycle | Whenever dust accumulates |
on the unit or every 2 months |
Gently remove dust from the sensor opening and the back panel, using a vacuum cleaner attachment or similar tool.
When the back panel has stubborn dirt
1 | In case of oily dirt, soak the back panel in water with |
kitchen detergent. | |
Avoid scrubbing the back panel hard when washing. | |
2 | Rinse the back panel repeatedly with clean water to re- |
3 | move the solution residue. |
Drip dry filter to remove excess water. |
SENSOR FILTER CARE
Remove the sensor filter and tap it lightly over a sink or bin to dislodge dust. If it is very dirty, wash it gently with lukewarm water. Do not use any detergents or chemicals of any kind to clean the filter. Dry the filter completely before replacing in the unit. Do not operate unit without all filters properly installed.
Sensor
Back Panel
Back Panel
Sensor Filter
日本語
UNIT
Care Cycle Whenever dust accumulates on the unit or every 2 months
To prevent dirt or stains on the unit, clean regularly. If stains are allowed to remain, they may become difficult to remove.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
