No sound is heard when playing back a disc.
•The audio will not be output when you connect a device via the S video plug only. Connect the white and red plugs of the A/V connecting cable, too (p.78).
You cannot dub correctly using the A/V connecting cable.
•Set [DISP OUTPUT] to [LCD PANEL] (p.68).
•The A/V connecting cable is not connected properly. Make sure that the A/V connecting cable is connected to the proper jack, i.e. to the output jack of a device you are dubbing a picture from, or to the input jack of another device for dubbing a picture from your camcorder.
OthersUnable to finalize.
•Battery is running out during finalizing. Use an AC adaptor.
•The disc has already been finalized. If you are using a
You cannot edit or record additional material on a disc using other devices.
•You may not be able to edit a disc recorded on your camcorder using another device.
The disc title cannot be changed.
•You cannot record a disc title on a finalized
•The disc has already been finalized. If you are using a
•The disc title may not be changed on your camcorder if the disc title has been made by another device.
A photomovie cannot be created.
•There are no still images.
•There may be a lot of still images on a disc and the remaining disc capacity is low. Delete unneccesary images from the disc (p.72).
The melody or beep sounds for 5 seconds.
•The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.
•Moisture condensation has occurred with the disc. Turn off your camcorder and leave it for about 1 hour (p.109).
•Some problems have occurred in your camcorder. Remove the disc and insert it again, then operate your camcorder again.
Troubleshooting
97