Recording additional scenes after finalizing

You can record additional material on the finalized DVD-RWs (VIDEO mode)/ DVD+RWs by following the steps below if there is space to record on the disc.

When using the finalized DVD-RW (VR mode) disc, you can record additional material on the disc without any additional steps.

•Use an AC Adaptor as power source to prevent your camcorder from running out of power during operation.

•Do not apply shock or vibration to your camcorder, and do not disconnect the AC adaptor during operation.

•A DVD menu and a Photomovie created during finalizing are deleted.

•When you use a double-sided disc, following procedures are required on each side.

When using a DVD+RW

If you have created a Photomovie or a DVD menu in finalizing (p.44), the following steps are required.

1Connect the AC Adaptor to the DC IN jack on your camcorder, then connect the mains lead to the wall socket.

2Slide the POWER switch down to

light up the (Movie) or (Still) lamp.

When using a DVD-RW (VIDEO mode) disc (Unfinalizing)

1Connect the AC Adaptor to the DC IN jack on your camcorder, then connect the mains lead to the wall socket.

2Turn on the power by sliding the POWER switch down.

3Insert the finalized disc into your camcorder.

4 Touch [SETUP].

5Touch DISC SET

[UNFINALIZE].

6Touch [YES] [YES], then touch

when [Completed.] appears.

3Insert the finalized disc into your camcorder.

A confirmation dialog asking if you record additional scenes appears.

4Touch [YES] [YES].

[Completed.] appears, then the screen returns to the recording screen.

50