Tips for Using the Battery Pack
This section shows you how you can get the most out of your battery pack.
Preparing the Battery Pack
Always Carry Additional Batteries
Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned.
Battery Life is Shorter in Cold Environment
Battery efficiency is decreased and the battery will be used up more quickly if you are recording in cold environment.
To Save Battery Power
Turn the STANDBY switch on the camcorder down when not recording to save battery power [a].
A smooth transition between scenes can be made even if recording is stopped and started again. While positioning the subject, selecting an angle, or looking at the viewfinder, the lens moves automatically and the battery is used. The battery is also used when a cassette is inserted or removed.
When to Replace the Battery Pack
While you are using your camcorder, the remaining battery indicator decreases gradually as battery power is used up.
When the remaining battery indicator reaches the lowest point, the iindicator appears and starts flashing in the viewfinder. [b]
When the iindicator in the viewfinder changes from slow flashing to rapid flashing while you are recording, set the POWER switch to OFF on the camcorder and replace the battery pack. Leave the tape in the camcorder to obtain smooth transition between scenes after the battery pack is replaced.
[a] | [b] |
START/
STOP
LOCK
STANDBY
PHOTO STANDBY
Information Additional
Notes on the Rechargeable Battery Pack
Caution
Never leave the battery pack under temperatures above 140 ˚F (60 ˚C), such as in a car parked in the sun or under direct sunlight.
63