WARNING
AC power cord must only be changed at qualified service shop.
Precautions
•The set is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the set itself has been turned off.
•To prevent accident from a short circuit, do not come into contact with the terminal inside the shutter at the rear of the camcorder.
Notes on the POWER lamp
•The POWER lamp will remain lit for a while even if the unit is unplugged after use. This is normal.
•If the POWER lamp does not light, disconnect the AC power cord. After about one minute, try again.
Using a Car Battery
Use the
Use the connecting cord supplied with this camcorder.
Operations Advanced
19