Playing Back a Tape
You can monitor the playback picture in the viewfinder. You can also watch it on a TV screen, after connecting the camcorder to a TV or VCR (p. 15). You can control playback using the supplied Remote Commander (p. 76).
(1)While pressing the center button on the POWER switch, turn it to VTR.
(2)Insert the recorded tape with the window facing out.
(3)Press 0to rewind the tape.
(4)Press ·. Playback starts.
1
|
| W | |
|
| PO | ER |
|
| A |
|
|
| ER |
|
C | A | M | OFF |
| |||
|
| ||
|
|
| R |
|
|
| VT |
3 REW
4 PLAY
To stop playback, press .
To
To monitor the sound while viewing the playback picture in the viewfinder
Connect headphones (not supplied) to the 2jack (p. 75).
To mark the portion you want to monitor again
Press ZERO SET MEMORY while playing back.
After you finish playing back, press 0. The tape rewinds to the position you want (0:00:00) and stops.
Various Playback Modes
To view a still picture (playback pause)
Press Pduring playback. To resume playback, press Por ·. When still picture mode lasts for 5 minutes or more, the camcorder automatically enters stop mode. To playback again, press ·again.
To locate a scene (Picture Search)
Keep pressing 0or )during playback. To resume normal playback, release the button.
To monitor the
Keep pressing 0while rewinding or )while advancing the tape. To resume normal playback, press ·.
To view the picture at 1/5 speed (Slow Playback)
Press <or >to select direction, then press &during playback. To resume normal playback, press ·. If slow playback lasts for about 1 minute, it shifts to normal speed automatically.
To view the picture at double speed
Press <or >to select direction, then press x2 on the Remote Commander during playback. To resume normal playback, press ·.
16