Starting Editing
(1)Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your recorded tape into the camcorder.
(2)Play back the recorded tape on the camcorder until you locate the point where you want to start editing. Then set the camcorder to playback pause mode.
(3)Set the recording VCR to recording pause mode.
(4)Press Pon the camcorder and VCR simultaneously to start editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Stop Editing
Press STOP on the camcorder and VCR.
Note on editing when using the A/V connecting cable
Press DISPLAY on the Remote Commander while editing onto another tape to turn off the display indicators. Otherwise, the indicators will be recorded on the tape.
If your VCR is a monaural type
Connect only the white plug for audio on both the camcorder and the VCR. With this connection, the sound is monaural.
For fine synchro-editing function
You can edit precisely by connecting a control cable to the LANC jack of this camcorder and other video equipment having fine
Notes on editing when using the DV connecting cable
∙You can connect one VCR only.
∙When using the
∙Connect the LANC jacks when controlling this camcorder from an other VCR for editing.
∙If you record playback pause picture via the DV jack, the recorded picture becomes rough.
∙You can use this camcorder as a recorder. In this case, you do not need to change the connection since the direction of signal flow changes automatically, but check that "DV IN" appears on the TV and/or viewfinder.
When you use this camcorder as a recorder
Cassette memory data is not recorded.
Operations Advanced
55