Features

The DDM series is a super-high-resolution graphic display monitor which employs a raster scanning method.

Super high density graphic display

An extremely high resolution 2,048 dots (horizontal) × 2,048 lines (vertical) per frame has been made possible through the development of a 300 MHz band width video amplifier.

20-inch by 20-inch useful screen size

The 32-inch Trinitron picture tube with a 1:1 aspect ratio presents a square picture.

Multi-layer optical coatingThis minimizes ambient light reflection.

Precautions

This unit will not operate as a normal TV receiver/monitor.Power requirement

The monitor operates from single phase power, within the following nominal voltage ranges: DDM-2801CU/2811CU/2802CU/2802CNU: AC100 - 240V

Destination of each model

DDM-2801CU

DDM-2802CUThe northern hemisphere DDM-2802CNU

DDM-2811CU

The southern hemisphere

Safety

∙Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.

∙Unplug the unit from the wall outlet if it is not to be used for a long period of time.

Operating Environment

∙Temperature: The air temperature in the immediate surrounding vicinity of an operating monitor, or air temperature within the structure in which it is operating (for example within a console), is likely to be greater than the average ambient room temperature. It is important, therefore, when installing the monitor, to ensure that the air temperature in this operating environment of the monitor does not exceed the maximum allowable temperature limit of 40 degrees Celsius.

∙Air Flow: The level of air flow required for safe operation of the monitor must not be compromised or reduced in any way by the condition of its operating environment.

Installation

∙Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces such as rugs, blankets or near curtains which might block the ventilation holes.

∙Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, moisture, mechanical vibration, or shock.

Transportation

∙Do not throw away the original carton and packing materials. They make an ideal container in which to transport the unit.

When shipping, repack the unit as illustrated on the carton.

∙When carrying, handle with care so as not to expose the unit to shock, especially to the picture tube.

If you have any questions or problems about this unit, consult your Sony representative.

10