
7 Press CD SYNC
“” flashes, and “SYNC” appears in the display.
8 Press PLAY MODE/DIRECTION on the remote repeatedly to select g to record on one side.
Select j (or RELAY) to record on both sides.
9 Press REC PAUSE/START.
Recording starts.
To cancel Program Edit in stop mode
Press PLAY MODE/DIRECTION on the remote repeatedly until “1 DISC” or “ALL DISCS” appears in the display.
Timer-recording radio
programs
To
1 Tune in the preset radio station (see “Listening to the radio” on page 42).
2 Press CLOCK/TIMER SET on the remote.
“DAILY SET?” appears.
3 Press . or > repeatedly to select “REC SET?”, then press ENTER on the remote.
“ON” appears and the hour indication flashes.
4 Set the time to start recording.
Press . or > repeatedly to set the hour, then press ENTER on the remote. The minute indication flashes.
Press . or > repeatedly to set the minutes, then press ENTER on the remote.
The hour indication flashes again.
5 Set the time to stop recording following step 4.
The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”), then the original display appears.
6 Insert a recordable tape into deck B.
7 Turn off the power.
When the recording starts, the volume level is set to the minimum.
To | Do this |
Check the setting | Press CLOCK/TIMER |
| SELECT on the remote and |
| press . or > repeatedly |
| to select “REC SELECT?”, |
| then press ENTER on the |
| remote. |
|
|
Change the setting | Start over from step 1. |
|
|
Cancel the | Press CLOCK/TIMER |
SELECT on the remote and | |
| press . or > repeatedly |
| to select “TIMER OFF?”, |
| then press ENTER on the |
| remote. |
|
|
Notes
•If the power is on at the preset time, the Timer- recording does not work.
•When you use the Sleep Timer, the
•The power turns on 15 seconds before the preset time.
•You cannot activate the Daily timer and the Timer- recording simultaneously.
Tape