DK-AP8P System connections (continued)
Preparation for Use
■Using with the batteries
Use 4 “AA” size batteries
1Open the battery cover.
Slide the cover in the direction of the arrow.
2Insert the batteries according to the direction indicated in the battery compartment.
3Close the cover.
Note:
Battery life may vary depending on the temperature, battery types and usage conditions.
Battery replacement:
When batteries are low, sound may become distorted and unit may automatically turn off during high volume level. Reduce the volume level or replace the batteries.
Caution:
Do not use rechargeable batteries
Precautions for battery use:
●Installing the batteries incorrectly may cause the unit to malfunction.
●Insert the batteries according to the direction indicated in the battery compartment.
●Remove the batteries if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.
●When using batteries, the brightness of all illumination light (indicators) is reduced compared to using AC/DC adaptor.
●Replace all old batteries with new ones at the same time.
●Do not mix old and new batteries.
●Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Changing power source:
Turn off the unit before changing the power source. If the 6V DC power supply is directly plugged in during power on, the unit may automatically enter to
10
