•Using a battery other than the specified one may result in the battery rupturing.
•Dispose of used batteries as specified by the local authorities.
•Do not leave the remote control in a very hot and humid place.
•Take care that no foreign objects get inside the remote control when you, for example, replace the battery.
•Incorrect use of the battery may cause leaking and corrosion.
–Do not recharge the battery.
–When the remote control will not be used for a long period of time, remove the battery from the remote control to prevent leaking and corrosion.
–Incorrectly inserting, shorting, dismantling, or heating the battery, or throwing it into a fire may cause the battery to rupture or leak.
About descriptions in this manual
The operations described in this manual are based on remote control operation. When an operation is performed differently, for example, with the remote control and the buttons on the photo frame, it will be explained in a tip.
Setting the stand
1 Hold the photo frame tightly and insert the stand straight into the screw hole on the rear panel.
2 Screw the stand into the screw hole firmly until the stand stops turning.
Setting to portrait or landscape orientation
You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand.
operations Basic
Continued